International Scientific and Technical Conference
dedicated to the 95th anniversary of Don State Technical University and Metal Cutting Machines and Tools department
dedicated to the 95th anniversary of Don State Technical University and Metal Cutting Machines and Tools department
Mechanical engineering
2025
Technological
Systems
Location of the event:
April 10-12, Rostov-on-Don, Gagarin Square 1, Don State Technical University, building 1, auditorium 1-283.
April 10-12, Rostov-on-Don, Gagarin Square 1, Don State Technical University, building 1, auditorium 1-283.
Dates: April 10-12, 2025
Conference work areas
Technological systems for mechanical and physical and technical processing of materials
Information technology in metalworking
Friction, wear and lubricants
Calculation and design of technological equipment and tools
Training and advanced training of specialists for high-tech in mechanical engineering
Participation format
- Full-time participantFull-time participation in the conference with a report and publication of materials
- Participation in absentiaSubmission and publication of materials
- As a listenerParticipation in the conference with the opportunity to discuss reports, without a report and without publication
- Accommodation expenses are to be covered by conference participants themselves.
Conference Schedule
April 10
10.00 – 16.00 Plenary session
10.00 – 16.00 Plenary session
April 11
10.00 – 15.00 Section work in different directions
10.00 – 15.00 Section work in different directions
April 12
10.00 – 12.00 Conference summary
10.00 – 12.00 Conference summary
Program Committee
- Besarion C.
MeskhiChairman, Grand PhD in Engineering, Professor, Rector
(DSTU, Rostov-on-Don, Russia) - Vladimir I.
KolesnikovDeputy Chairman,
Grand PhD in Engineering, Professor, Academician of the Russian Academy of Sciences
(RSUPS, Rostov-on-Don, Russia) - Mikhail A.
TamarkinDeputy Chairman,
Grand PhD in Engineering, Professor
(DSTU, Rostov-on-Don, Russia) - Vyacheslav F.
BezyazychnyiGrand PhD in Engineering, Professor, Honored Scientist and Technician of the Russian Federation
(RGATU, Rybinsk, Russia) - Andrey V.
KirichekGrand PhD in Engineering, Professor
(BSTU, Bryansk, Russia) - Vladislav P.
SmolentsevGrand PhD in Engineering, Professor
(VSTU, Voronezh, Russia)
- Vilor L. Zakorotny – Grand PhD in Engineering, Professor (DSTU, Rostov-on-Don, Russia);
- Valery Y. Blumenstein – Grand PhD in Engineering, Professor (KuzGTU, Kemerovo, Russia);
- Petr Y. Bochkarev – Grand PhD in Engineering, Professor (Volgograd State Technical University, Volgograd, Russia);
- Sergey M. Bratan – Grand PhD in Engineering, Professor (SevSU, Sevastopol, Russia);
- Vladimir A. Vitrenko – Grand PhD in Engineering, Professor (V. Dahl Lugansk National University, Lugansk, Russia);
- Semyon A. Zaides – Grand PhD in Engineering, Professor (IrNITU, Irkutsk, Russia);
- Evgeniy S. Kiselev – Grand PhD in Engineering, Professor (UlSTU, Ulyanovsk, Russia);
- Alexander M. Kozlov – Grand PhD in Engineering, Professor (Lipetsk State Technical University, Lipetsk, Russia);
- Viktor P. Kuznetsov – Grand PhD in Engineering, Professor (Ural Federal University, Ekaterinburg, Russia);
- Vadim V. Kuts – Grand PhD in Engineering, Professor (South-West State University, Kursk, Russia);
- Alexander A. Antsev – Grand PhD in Engineering, Professor (Tula State University, Tula, Russia);
- Mikhail V. Pesin – Grand PhD in Engineering, Professor (PNIIPU, Perm, Russia);
- Andrey M. Markov – Grand PhD in Engineering, Professor (AltSTU, Barnaul, Russia);
- Alexander N. Mikhailov – Grand PhD in Engineering, Professor (DonNTU, Donetsk, Russia);
- Yuliy L. Chigirinsky – Grand PhD in Engineering, Professor (Volgograd State Technical University, Volgograd, Russia);
- Sergey N. Shevtsov – Grand PhD in Engineering, Professor (Southern Scientific Center of the Russian Academy of Sciences, Rostov-on-Don, Russia);
- Anatoliy G. Suslov – Grand PhD in Engineering, Professor (Moscow State Industrial University (MSIU), Moscow, Russia);
- Dmitry V. Lobanov – Grand PhD in Engineering, Professor (CSU, Cheboksary, Russia);
- Boris M. Brzhozovsky – Grand PhD in Engineering, Professor (IMASH RAS, Moscow, Russia);
- Elena Y. Kropotkina – Grand PhD in Engineering, Professor (MSTU “Stankin”, Moscow, Russia);
- Alexander N. Chukarin – Grand PhD in Engineering, Professor (RGUPS, Rostov-on-Don, Russia);
- Gennady I. Shulga – Grand PhD in Engineering, Professor (SRSPU, Novocherkassk, Russia);
- Margarita A. Skotnikova – Grand PhD in Engineering, Professor (SPbPU, St. Petersburg, Russia);
- Aleksandr E. Zverovshchikov – Grand PhD in Engineering, Professor (PSU, Penza, Russia);
- Petr D. Motrenko – Grand PhD in Engineering, Professor (PJSC Rostvertol, Rostov-on-Don);
- Al-Obaidi Louai Mohamed Rajab – PhD in Engineering, Associate Professor (MTU, Baghdad, Iraq);
- Sergey V. Gruby – Grand PhD in Engineering, Professor (Bauman Moscow State Technical University, Moscow, Russia);
- Hamuda Khaled – Grand PhD in Engineering, Professor (University of Science and Technology Houari Boumediene, Algiers, Algeria);
- Nguyen Van Tho – PhD in Engineering (Haiphong University, Haiphong, Vietnam);
- Mikhail L.Kheyfets – Grand PhD in Engineering, Professor (Institute of Applied Physics, Minsk, Belarus).
Organizing Committee
- Innessa N.
EfremenkoChairman,
Grand PhD in Economics, Professor, Vice-Rector for Research and Innovation
(RSUPS, Rostov-on-Don, Russia) - Valery A.
LebedevDeputy Chairman,
PhD in Engineering, Professor,
Head of the Department of Metal-Cutting Machines and Tools
(DSTU, Rostov-on-Don, Russia) - Denis V.
MoiseevDeputy Chairman,
PhD in Engineering, Associate Professor of the Department of Metal-Cutting Machines and Tools, Academic Secretary
(DSTU, Rostov-on-Don, Russia)
- Maxim D. Gavrilenko – Senior Lecturer, Scientific Mentor of the Scientific Council of the Department of Metal-Cutting Machines and Tools, Programming of Technological Equipment (Rostov-on-Don, Russia);
- Irina V. Davydova – PhD in Engineering, Associate Professor, Leading Engineer of the Research Institute "Vibrotechnology" (Rostov-on-Don, Russia);
- Filipp A. Pastukhov – Leading Engineer of the Research Institute "Vibrotechnology" (Rostov-on-Don, Russia);
- Sergey V. Lesnyak – PhD in Engineering, Associate Professor of the Department of Metal-Cutting Machines and Tools (Rostov-on-Don, Russia);
- Denis N. Kuimov – PhD in Engineering, Associate Professor, Head of the Scientific Research Department (Rostov-on-Don, Russia);
- Egor D. Voloshin – student of the TKT32 group, Faculty of Mechanical Engineering Technology, scientific leader of the SNC “Programming of Technological Equipment” (Rostov-on-Don, Russia);
- Mikhail M. Chaava – PhD in Engineering, Associate Professor, Dean of the Faculty of Mechanical Engineering Technology (Rostov-on-Don, Russia);
- Evgeny V. Fominov – PhD in Engineering, Associate Professor of the Department of Metal-Cutting Machines and Tools (Rostov-on-Don, Russia);
- Svetlana G. Studennikova - Head of Publication Activity Department (Rostov-on-Don, Russia).
Key dates
Application deadline
March 15, 2025
Deadline for submission of articles for publication
March 30, 2025
Deadline for payment of registration fee
March 30, 2025
Registration form
By filling out this form, you confirm your consent to the publication of the conference materials by the Don State Technical University and the provision of personal data.
It is scheduled for 2025.
Contacts:
Organizing Committee of the conference "METS-25":
344002, Rostov-on-Don, Gagarin sq., 1, DSTU
Department of Metal-cutting Machines and Tools, room 1-284
Tel. +7 (863) 2738–777, +7 951-539-51-59, +7 909-430-26-48
E-mail: konf_mrsii@mail.ru
